M
morriskarenSep 2, 2025
How to reduce echo or noise on Kenwood KDC-BT555U Car Receiver?
- BBryan HutchinsonSep 2, 2025
If echo or noise occurs with your Kenwood Car Receiver, adjust the microphone unit’s position and check the [ECHO LEVEL] setting.
To Next PageTo Next PageHow to reduce echo or noise on Kenwood KDC-BT555U Car Receiver?
If echo or noise occurs with your Kenwood Car Receiver, adjust the microphone unit’s position and check the [ECHO LEVEL] setting.
What does “PLEASE EJECT” mean on Kenwood KDC-BT555U Car Receiver?
If “PLEASE EJECT” / “PLS EJECT” appears on your Kenwood Car Receiver, reset the unit.
Why is voice calling not working on my Kenwood Car Receiver?
If the voice calling method is not successful on your Kenwood Car Receiver, use voice calling method in a more quiet environment. Also, reduce the distance from the microphone when you speak the name, and make sure the same voice as the registered voice tag is used.
What does “NO SIGNAL” mean on Kenwood KDC-BT555U?
General| Power Output (RMS) | 22W |
|---|---|
| Bluetooth | Yes |
| USB Port | Yes |
| CD Playback | Yes |
| Radio Tuner | AM/FM |
| Display Type | LCD |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Subwoofer Output | Yes |
| AUX Input | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | Yes |
| FLAC Playback | Yes |
| Remote Control | Yes |
| Channels | 4 |
| Wireless Audio Streaming | Yes |
| Built-in Microphone | Yes |
| Steering Wheel Control Compatible | Yes |
| Equalizer | 13-Band Graphic |
| Maximum Output Power | 50W x 4 Channels |
How to turn on/off, adjust volume, select sources, and change display.
Guide to configure initial setup options like preset type and key beep.
How to begin playing music from CD, USB, or iPod.
Setting up and listening to Pandora via the connected device.
Connecting and activating the SiriusXM Connect Vehicle Tuner.
Steps to establish a wireless connection with a Bluetooth device.
Handling incoming and outgoing calls, switching modes, and adjusting volume.
Using voice commands and intelligent personal assistants.
Controlling music playback from a connected Bluetooth device.
Resolving issues with no sound, no power, or incorrect display information.
Troubleshooting errors like "NO DISC", "TOC ERROR", and "READ ERROR".
Addressing "NO DEVICE", "USB ERROR", "iPod ERROR", and playback discrepancies.
Resolving issues like ADD ERROR, SEARCH ERROR, and station limits.
Troubleshooting no device detection, pairing failures, and "DEVICE FULL".
Addressing echo, noise, poor sound quality, and interrupted playback.
Critical safety precautions before and during installation.
Step-by-step guide for wiring and mounting the unit.
Instructions for mounting the unit in the dashboard or without a sleeve.
Detailed diagram showing how to connect wires for power, speakers, and accessories.
