Kenwood NX-5200 User Guide

Indicator Description
Connected to a Bluetooth device.
The GPS position is determined. Blinks when the GPS is
unable to determine the position.
Non-priority Scan or Voting/ Site Roaming is in progress.
Blinks when the scan is paused. (Green icon)
Priority Scan is in progress. Blinks when the scan is
paused. (Red icon)
Indicates Priority channel 1 or Priority Monitor ID 1.
Indicates Priority channel 2 or Priority Monitor ID 2.
Indicates Priority Monitor ID 3.
Indicates Priority Monitor ID 4.
The current channel is added to the scanning sequence.
The current zone is added to the Multi-Zone scanning
sequence.
The Scrambler function is activated.
The Encryption function is activated. Blinks when receiving
an encrypted carrier.
The Encryption (AES) function is activated. Blinks when
receiving an encrypted carrier.
The Encryption (DES) function is activated. Blinks when
receiving an encrypted carrier.
The Talk Around function is activated.
The Monitor or Squelch Off function is activated.
The External Speaker is activated.
The Noise Reduction function is activated. Blinks when
Noise Reduction is functioning.
Blinks when an incoming call matches your Optional
Signaling.
22

Kenwood NX-5200 Specifications

General

IP Rating	IP67
Zones	128
GPS	Yes
Bluetooth	Yes
Voltage Range	7.5V DC ±20%
Operating Temperature	-30°C to +60°C
Frequency Range	136-174 MHz
Battery Life	14 hours (Digital mode)
Digital Protocol	NXDN, DMR
Display	LCD