o
Manual Site Hunt <M.Hunt>
Enables or disables Manual Site Hunt function. Applicable to DMR Site Roaming
only.
o
Medium Transmit Power
Turns Medium Transmit Power on or off. When using a channel programmed with
low or high power, this allows you to change the output power to medium.
o
Menu <Menu>
Press this key to select and perform functions using the transceiver Menu.
o
Mic Sense
Allows you to change the microphone sensitivity.
o
Microphone Type
Allows you to select a microphone type that suits the optional external microphone
connected.
o
Monitor <Moni>
Allows you to turn the transceiver signaling off, to listen to all calls that are received
on the channel.
o
Monitor Momentary <Moni>
Press and hold this key to momentarily turn the transceiver signaling off. Releasing
this key turns the transceiver signaling back on. While signaling is off, you can listen
to all calls that are received on the channel.
o
Operator Selectable Tone <OST>
Refer to “Operator Selectable Tone (OST)” {p. 47} .
o
OST Down <OST->
Press this key to decrease the Operator Selectable Tone number of your selected
channel.
o
OST List
Allows you to enter OST List mode.
o
OST Up <OST+>
Press this key to increase the Operator Selectable Tone number of your selected
channel.
o
OVCM <OVCM> (Open Voice Channel Mode)
Allows the conversation of a received call to be heard even when the received ID
does not match.
o
Playback <Play>
Refer to “Playback” {p. 79} .
32
To Next Page
Loading...
Need help?
General
