Kenwood Sovereign VR-5080 User Manual

14
Using Receiver
How Do I Adjust the Sound?
Adjusting Speaker Levels
You can use the Sound menu to temporarily adjust the speaker levels of
your center speaker, surround speakers, surround back speakers and
subwoofer. For example, if a particular movie has dialog that’s hard to
understand, you can temporarily increase the center channel volume just
for that movie. For more information on adjusting speaker levels per-
manently, see “Chapter Two: Setting Up Remote Control Unit” in the
Connections and Setup Guide.
1. Press the SOUND button on Remote Control unit repeatedly until
the speaker name to be adjusted is displayed.
Center : center speaker
Sur. Right :
left and right surround speakers
Sur. Left :
Sur. Back R :
left and right surround back speakers
Sur. Back L :
Sub Woofer : subwoofer
The two surround speakers cannot be adjusted independently between
each other.
The two surround back speakers cannot be adjusted independently be-
tween each other.
2. Press the LCD cursor up/down (
/ ) button on Remote Control
unit to select the desired volume level, then press the Home button.
Operation on the receiver:
1. Press the SOUND button inside the door repeatedly until the name
of the speaker(s) to be adjusted is displayed.
C : center speaker
SL/SR : left and right surround speakers
SBL/SBR : left and right surround back speakers
SW : subwoofer
Sound
Center = +5dB
Home Next

Kenwood Sovereign VR-5080 Specifications

General

Channels	5.1
Total Harmonic Distortion	0.09%
Input Sensitivity	200 mV
Signal-to-Noise Ratio	100 dB
Frequency Response	10 Hz - 100 kHz
Digital Inputs	3 Optical, 2 Coaxial
Video Connections	Composite, S-Video
Dimensions	440 x 170 x 420 mm