Kenwood TM-2570A User Manual

PHONE TONE
VOICE
22
4-7-2. Storing a telephone channel in normal
memory
@ Select the desired memory channel with the MEM-
ORY CHANNEL selector.
@ Press the PHONE switch.
@ Select the desired telephone channel number with the
MEMORY CHANNEL selector.
(When the [C| key is pressed, “4--” will be dis-
played, erasing any previously stored telephone chan-
nel number, and turning off the telephone indicator
Dp. If you wish to review the contents of the tele-
phone channel press the key as previously de-
scribed.)
@ Press the [M] key.
(Pressing the [M] key stores the telephone channel in-
formation in the selected memory channel. Either the
key mode or the memory mode may be used for this
operation.)
@® Press the PHONE switch to return to the normal fre-
quency display.
Any telephone number channel may be entered into any
memory channel location using the above procedures.
4-7-3. Automatic telephone number transmis-
sion
@ Select the desired telephone number channel using
the MEMORY CHANNEL selector.
@ Press the PTT switch.
@ Press the PHONE switch to initiate transmission of
the telephone number.
(Pressing the PHONE switch with the telephone indi-
cator off will cause an alarm to sound, signifying an
error in operation.
*
Conventional
16-key
autopatch
operation
is
also
possi-
ble,
as
is
a
combination
of
automatic
dialing
and
con-
ventional
dialing.
Simply
press
and
hold
the
PTT
bar
when
conventional
operation
is desired.

Kenwood TM-2570A Specifications

General

Brand	Kenwood
Model	TM-2570A
Category	Transceiver
Language	English