470-BA-defs-0017
41
Indication of the actual weight value on the weighing plate by pressing
F
twice.
Return to the % display by pressing
F
.
Tare cups/container can also be used for percent determinations. Before starting tare
them with
TARE.
Percent determination with tolerance range see point 7 „Weighing with tolerance
range“.
To leave the mode „percent“ press
F
and release it when
Func
and then
1 SEt 3
appears.
Further see point 10 „General programmations“.
The last memorised 100 % reference weight is kept even when the mode „percent“ will
be left.
To Next Page
Loading...
