KERN 470 Series User Manual

470-BA-defs-0017
46
8.2 Net-total weighing
Useful when a mixture of several components will be weighed in a tare cup, and when
finally the sum weight of all components will be needed for control (Net-total), i.e.
without the weight of the tare cup. Place the tare cup (for example 852 g) on the
weighing plate.
Tare the display with
TARE
to
0
.
Weigh in component I, for example 600 g-
After termination of the weighing in and the light up of the stability detector
o
(left side above in the display) the indicated value will be transferred to the sum
memory by pressing
S
.
Σ
ΣΣ
Σ
600 g
600 g
Indication for a moment the sum weight , then
Tare to
0
with
TARE
.
Weigh in component III, for example 100 g
See above.
Indication after having pressed
S
firstly sum weight
Σ
ΣΣ
Σ
1000 g
then
400 g .
Tare to
0
with
TARE
.
Weigh in component III, for example 100 g
See above.
Indication after having pressed
S
firstly sum weight
Σ
ΣΣ
Σ
1100 g
then
100 g .
After having terminated the weighing in of the individual components to the required
mixture the sum weight of all weighings
I + II + III
appears by pressing twice
F,
for example
Σ
ΣΣ
Σ
1100 g
(600 + 400 + 100 g)
This is an important end control for the dispensing.
The weight of the tare cup (852 g in the example is not included in the sum weight of
the components
I + II + III
.
Delete with
TARE
.
Return to the mode „weighing“ with
F
.

KERN 470 Series Specifications

General

Brand	KERN
Model	470 Series
Category	Scales
Language	English