FCF-BA-e-1611 13
Weigh the material, the net weight will be indicated.
The taring process can be repeated any number of times,
e.g. when adding several components for a mixture
(adding). The limit is reached when the whole weighing
range is exhausted.
After removing the weighing container, the weight of the
weighing container appears as negative display.
The tare weight is saved until it is deleted.
Delete tare
Unload the balance and press , the zero display
appears.
Using this function the weight of a tare vessel is stored. Even
after turning off/on the weighing balance will continue working
with the saved tare value.
In weighing mode put tare vessel on the weighing plate
Press repeatedly until „PtArE“ will appear flashing.
Use to save the current weight on the weighing plate
as a PRE-TARE value.
Delete PRE-TARE
value
Remove all loads from the balance and press
repeatedly until „PtArE“ will appear flashing.
Acknowledge with . The PRE-TARE value is deleted,
the zero display appears.
To Next Page
Loading...
