It is useful if a mixture of several components is weighed into a
tare vessel and finally the sum weight of all weighed
the weight of the tare vessel).
Example:
1. Place tare container on the weighing plate; press ,
the zero display appears.
2. Weigh-in the component . Press , the zero display
appears. [] is displayed on the right border of the display.
3. Weigh-in the component , press . Net-total (sum
weight of the components and ) is displayed.
4. Press again, the zero display appears.
5. Weigh-in the component , press . Net-total (sum
weight of the components and and ) is displayed.
If necessary, also fill the formula up to the desired final
value. For every component more repeat the steps 4-5.
Back to weighing mode by pressing the button.
To Next Page
Loading...
