KERN FKB

28 TFKB-B-BA-e-2311
Enable another unit:
 Select menu setting < unit> and confirm on ➔
button.
 Wait until the display flashes.
 Use the navigation keys  to select the weighing
unit and confirm on ➔ button.
For the required settings of an application unit (%, FFA) selection, please see
chap. 10.4.2 and 10.4.3.
8.5.2 Display gross weight value
As per standard the change-over button is set so that is it possible to display the
gross weight value by long-time pressing.
 Keep the button pressed until the display
shows the gross weight value.
After releasing the button, the gross weight value
will be kept in the display for a short time.

8.5.3 Open PRE-Tare settings
As per standard the F-key is set so that the menu setting < Ptare> is invoked by
pressing the key shortly. Further settings, see chap. 10.2.
8.5.4 Carry out Data-Hold function
As per standard the F-key is set so that the Data-Hold function < hold> is exe-
cuted by pressing the key for a long time, see chap. 10.3.