KERN FKB

30 TFKB-B-BA-e-2311
9 Operating concept
From factory the balance is delivered with various applications (weighing, check
weighing, counting). After the first start-up the balance is in the <Weighing> applica-
tion.
In the application menu (see chap. 13.2) however, you can define, selecting an ap-
plication, in which mode the balance after switching-on has to continue working. Eit-
her as per standard in weighing mode or e.g. in check mode or counting mode.
Selecting an application:
 Press the TARE key and hold it until
< apcmen > is displayed.
 The display changes to < wghmode> followed by
<Ptare>.
 Use the TARE-button to select the menu setting <mode>
and acknowledge with ➔ button.
 The last active application, e.g. < weih > is displayed.
 Use the TARE-button to select the desired application, se-
lectable
wei h
Weighing
count
Counting
check
Check weighing
 Acknowledge selection by ➔ button.