18 HFD-BA-e-1820
5. Commissioning
Attention: Always observe chapter 3 "General Safety Instructions"!
5.1 Unpacking
SAFETY
INSTRUCTIONS
for protection against
break
Once delivered and unpacked, crane scales will not be
taken back.
The crane scales have been sealed by Messrs. KERN.
Load suspension devices are sealed by an adhesive
tape.
The packaging is also sealed by adhesive tape.
Broken seal obliges to purchase.
Thanks for your comprehension.
Your KERN Quality assurance team
CAUTION
Danger for the back!
The crane scales are compact and quite heavy.
Remove the scales from packaging only with the help of
a second person.
Use a lifting device such as a crane or a forklift truck.
Secure the scales that they cannot fall down when they
are lifted.
Only use original packaging for returning.
Make sure that all parts are completely present.
• Crane scales
• Mains adapter
• Remote control
• Operating instructions (logbook)
5.2 Checking the original dimensions
Enter the original dimensions shown on the production data sheet in the grey
fields of the checklist chap. 10.3.
Check original dimensions of crane balance; for implementation see chap.10.2
"Regular Maintenance"
Enter all data (date, tester, results) in the first line under "Inspection before first
use" in the checklist (see chapter 10.3)
CAUTION
If the dimensions of your first safety inspection do not match those
of KERN, the balance must not be put into operation. In this case
please contact a service partner authorised by Messrs. KERN.
To Next Page
Loading...
Need help?
General
