KERN HFD Series - Checklist Regular Maintenance, (See Chapter 10.2)

HFD-BA-e-1820 37
11.3 Checklist „Regular maintenance“, (see chapter 10.2)
Original dimensions crane scales, serial no.: ………………………………… Capacity ………………………………
Upper shackle Lower shackle Anchor eyelets
a (mm) b (mm) c (mm) Wear and tear Split pin&Nut a (mm) b (mm) c (mm) Wear and tear Split pin&Nut
Clearance f [mm]
Date ………………………………… Tester ………………………………………
*These data can be found in the document attached to the balance. Please keep this document always available.
Upper shackle Lower shackle Anchor eyelets
a b c
Wear and tear
(see grey fields)
Split pin & Nut
a b c
Wear and tear
(see grey fields)
Split pin & Nut Clearance
f
Date Tester
Max. admitted variation
5 % 0 % 5 %
No deformation or
cracks
Tight fit
5 % 0 % 5 %
No deformation or
cracks
Tight fit
1%
Revision prior to first
use
3 months / 12 500 x
6 months / 25 000 x
9 months / 37 500 x
12 months / 50 000 x
15 months / 62 500 x
18 months / 75 000 x
21 months / 87 500 x