KERN PRS

PRS/PRJ/ARS/ARJ-BA-def-0622 125
8.7 Weighing mode
To activate the menu see Chapter 7.4 “Activating the two main menus” and Chapter 7.5
“How the menu control operates”.
• SET
WEIGH-
ING
MODE
FLOATING DISPLAY 0.04
FLOATING DISPLAY 0.08
FLOATING DISPLAY 0.16
FLOATING DISPLAY 0.32
Enter integration time (in
seconds)
STABILITY LOW
STABILITY MEDIUM
STABILITY HIGH
Setting the stability control
(instability of the balance
location)
AUTO-STANDBY OFF
AUTO-STANDBY 5 MIN.
AUTO-STANDBY 10 MIN.
AUTO-STANDBY 30 MIN.
Auto-Standby not active or active
after nn minutes
AUTO-ZERO ON/OFF
Automatic zero correction on/off
QUICK TARE ON/OFF
Quick tare on/off
By using the weighing mode functions, you can describe the quality of the balance
location.
By using the AUTO-STANDBY function, you can define the period of non-use before the
balance automatically goes into the energy-saving mode.
NOTE
The automatic standby function only operates if automatic zero point compensation is
activated.
For further information see Chapter 13.