KERN PRS User Manual

120 PRS/PRJ/ARS/ARJ-BA-def-0622
8 Working with the configuration menu
This chapter describes the configuration menu and its functions.
To activate the menu see Chapter 7.4 “Activating the two main menus” and Chapter 7.5
“How the menu control operates”.
8.1 Structure of the configuration menu
The basic setting of the balance is defined in the configuration menu:
Main path Definable functions
SET
CONFIGURATION
Selection of the basic configuration (factory setting, user
setting or storing a
new user setting)
UNIT 1
Unit in which the results of the weighing are displayed
SET
DATA PRINT
Print formats; type of value to be printed out
(individual value, continuous print, time or load change
dependant values, date, time, user etc.)
SET
CALIBRATION
Calibration method
SET
WEIGHING MODE
Stability mode (Quality of the balance location), Auto-
Standby mode, zero correction, tare method (rapid or
standard tare); Chapter 6.6
SET
INTERFACE
Baud rate, parity, handshake functions of the
peripheral interfaces
SET
DATE AND TIME
Date and time (standard format or American format p.m.
and a.m.) [only ARJ and PRJ]
PASSWORD
Password protection for menu definition
THEFTCODE
Activation/deactivation and changing the
Anti-theft encoding
KEY TONE
Key Tone on/off
LANGUAGE
Language (E, G, F)

KERN PRS Specifications

General

Brand	KERN
Model	PRS
Category	Scales
Language	English