PRS/PRJ/ARS/ARJ-BA-def-0622 121
Printing conventions used in this document:
• The settings in the sub-paths pre-programmed in the factory are printed in bold in
these operating instructions.
• For greater clarity, only that part of the menu tree which corresponds to the function is
shown with each description of the function.
• You will find the entire menu tree for the configuration menu in Chapter 14
“Configuration menu tree”.
• Explanations of the menu functions are printed in italics.
8.2 Language function
To activate the menu see Chapter 7.4 “Activating the two main menus” and Chapter 7.5
“How the menu control operates”.
• LANGUAGE
SPRACHE DEUTSCH
LANGUAGE ENGLISH
LANGUE FRANCAISE
Select language
In order to alter the language, proceed as follows:
• Activate the configuration menu (see Chapter 7.4.1 “Activating the configuration
menu”)
• Press ”Ø” repeatedly until the current language is displayed.
• Press “ ”. The display starts to flash.
• Press ”Ø” repeatedly until the language you require is displayed.
• Press ” ” to confirm the selection.
• Press “esc” to exit the menu.
•SPR
To Next Page
Loading...
Need help?
General
