168 PRS/PRJ/ARS/ARJ-BA-def-0622
Fault Possible causes
There is no display
or only
dashes
The stability control (Balance functions) is set too sensitively
The time selected for Floating display is unsatisfactory
Configuration
menu
cannot be altered
The password lock is activated in the configuration menu
The display flashes
continuously
during calibration
The balance location is not stable (abort calibration by switching off
using “ON/OFF” key and then install the balance at a more suitable
location).
Use of an imprecise calibration weight (only applies to external
calibration)
To Previous Page
Loading...
Need help?
General
