34 / 180
Introduction
2017/11
1 Introduction
Dear customer,
customer,
We are pleased that you have decided to buy one of our products. This will certainly completely match your
requirements. We wish you smooth and successful installation.
In trying to keep our quality standard as high as possible, we rely on your help of course. Please let us know of
any possible improvements we could make to our product.
Have you got any questions? We look forward to you getting in touch.
1.1 Product description, general
The KESSEL lifting station Aqualift F Basic (referred to as „lifting station“ from here onwards) has been designed
for pumping off wastewater with and without sewage. The system tank houses the pump and the level sensor
(oat switch). All the assemblies have been matched to the KESSEL control unit included.
The level sensor switching signals for the wastewater level are processed electronically in the control unit. When
the switch-on level has been reached, the pump-off function is activated. When the level has fallen accordingly
again, pumping off is ended.
The pipe connections on the system tank have been prepared for different nominal widths and inlet directions.
The connection for a ventilation pipe has been prepared.
To Next Page
Loading...
