19
Note: If the control solution sample does not fill the check window, do not add a
second drop. Discard the test strip and start over with a new test strip.
6. Hold it in the drop until the meter beeps and begins to count down on the
screen, (from 5 seconds for glucose and from 9 seconds for ketones). Your
control test result appears after a beep.
Note: The meter will automatically recognize and show the control result for you.
Control results are not included in the 7, 14 and 30-day average calculation.
Understanding Your Control Test Result
Compare your control test result with the ranges printed on the test strip box or
label.
To Next Page
Loading...
