20
Notes:
If your control test result is out of range:
• Check the expiration dates of the test strip and control solution. Make sure that
the control solution bottle has not been opened for more than 6 months. Discard
any expired test strips or control solution.
• Confirm the temperature in which you are testing the control solution is between
59-104°F.
• Make sure that you store the test strip and control solution at 36-86°F, 1 0-90%
relative humidity.
• Make sure that the control solution bottle has been tightly capped.
• Make sure the test strip was used immediately after removing it from the test
strip foil pouch.
• Make sure the control solution was mixed well.
• Confirm that you are using Keto-Mojo
®
blood glucose test strip and control
solution, Keto-Mojo
®
blood β-ketone test strip and control solution.
• Make sure that you followed the test procedure correctly.
After checking all of the conditions listed above, repeat the control solution test with
a new test strip. If your results still fall out of the range indicated on the test strip box
or label, your meter or test strips may not be working properly. DO NOT use the
system to test blood. The system may not be working properly. If you cannot correct
the problem, contact Keto-Mojo at 800-513-1965 (5 days a week,10am-4pm PST)
for further assistance. Please contact your healthcare professional if you need help
outside of these hours.
To turn your meter off, just take out the test strip. Dispose of the used test strips as
medical waste. The result will be automatically marked and stored in the meter
memory. Control results will not be included in your blood glucose averages.
Using the Meter Memory
Your meter automatically stores up to total 1000 results with the time and date. Test
results are stored from the newest to the oldest. The meter will also calculate the
average values of blood glucose records from the last 7, 14 and 30-days.
Notes:
• If there are already 1000 records in memory, the oldest record will be erased to
make room for a new one.
• It is very important to set the correct time and date in the meter, please make
sure the time and date are correct after you change your battery.
To Next Page
