The Electronic Control features the following functions:
• Training settings that are permanently storable
Target pulse, time, distance, energy consumption
• Monitoring with optical and acoustic instructions
• Age-dependent maximum pulse, target pulse
• Display of fitness levels 1-6 calculated with the recovery pulse rate after 1 minute
• Motor break stage adjustment
• Trainings records as a personal profile storable under "SAVE" Count down
• Calculation of energy consumption according to break stage and step frequency
• Choice of display for speed and distance [KM/H or M/H]
• Choice of display for energy consumption [Kjoule or Kcal]
• Choice of display for temperature [°C or °F]
• Pulse receiver already built into the chest strap T34 from POLAR
UNIX PX and ELYX 3 features the following functions:
• Blue, green and red back lighting. Colour change according to pulse levels (Target
pulse zone reached or exceeded maximum pulse)
• Blue, green or red adjustable as permanent desired colour
Indicating range
Display
Function range
Buttons
Short description
The electronics consists of a function range with buttons and an
indicating range (display) with variable symbols and graphics.
19
GB
FB606-608-609
To Next Page
Loading...
