Keysight Technologies 8163A/B - Page 216

216 8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide
4 Measurement Operations & Settings
parameters: A boolean value: OFF or 0: foot pedal disabled (default)
ON or 1: foot pedal enabled
response: none
example: trig:conf? -> DEF<END>
command: :TRIGger:CONF:FPEDal?
syntax: :TRIGger:CONF:FPEDal?
description: Returns whether the Input Trigger connector can be triggered using a Foot Pedal.
parameters: none
response: A boolean value: 0: foot pedal disabled
1: foot pedal enabled
example: trig:conf?
-> DEF<END>