Keysight Technologies 8163A/B - Page 96

96 8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide
4 Measurement Operations & Settings
NOTE
Setting parameters for the logging function sets some parameters, including
hidden parameters, for the stability and MinMax functions and vice versa. You
must use the
:SENSe[n][:CHANnel[m]]:FUNCtion:PARameter:LOGGing on
page 97 command to set parameters before you start a logging function using
the
:SENSe[n][:CHANnel[m]]:FUNCtion:STATe on page 104 command.