418 Keysight N9927-90001 User’s Guide
Remote Server Mode (Requires CPU2 and SA Hardware/SA Option 233)
89600 VSA Software Overview (Requires CPU2 and N991xA/3x/A5x/A6xA and SA
Option 233)
89600 VSA Software Overview (Requires CPU2 and
N991xA/3x/A5x/A6xA and SA Option 233)
Connecting the FieldFox remotely to a PC running the 89600 VSA software, will
start the FieldFox’s Remote Server mode. The 89600 VSA software is powerful,
PC-based software, offering the industry's most sophisticated general purpose
and standards specific signal evaluation and troubleshooting tools for R&D
engineers. Even for proprietary and non-standard signals in SATCOM or
MILCOM applications, you can make signal quality measurements with
customized IQ constellation. Reach deeper into signals, gather more data on
signal problems, and gain greater insight.
— General-purpose analog and digital demodulators ranging from 2FSK to
4096QAM
— Flexible and custom IQ and OFDM signal analysis
— Standards specific modulation analysis including:
— Cellular: 5G, LTE & LTE-Advanced (FDD, TDD), W-CDMA,
GSM/EDGE, cdma2000, 1xEV-DO, TD-SCDMA,
— Wireless connectivity: 802.11ax, 802.11n/ac, 802.11a/b/g/j/p,
802.16 WiMAX (fixed/mobile), 802.15.4 Wi-SUN
—RFID
— Digital satellite video and other satellite signals, radar, LMDS
— Up to 400K bin FFT, for the highest resolution spectrum analysis
— A full suite of time domain analysis tools, including signal capture and
playback, time gating, and CCDF measurements
— Unlimited trace displays and the industry's most complete set of marker
functions
IMPORTANT! The following is a description of the 89600 VSA Software’s
overall capabilities. Your instrument may not have all of the hardware and
firmware required to use all of the 89600 VSA Software’s listed features.
The FieldFox remote server mode, requires 89600 VSA Software with
firmware version ≥22.01.
If you have the FieldFox’s Remote Server (89600 VSA software
connectivity), you can use the VSA software to capture and record your
data as MATLAB files (*.mat). Learn more about FieldFox and 89600 VSA
software, refer to http://www.keysight.com/find/assist.
If you have Option 351 I/Q Analyzer option, you can directly save your data
as MATLAB files (*.mat). Refer to Chapter 11, “IQ Analyzer (IQA) – Option
351 (CPU2 Only)”, on page 257 and to Chapter 31, “File Management.”
To Next Page
Loading...
Need help?
General
