Keysight N9927-90001 User’s Guide 255
RTSA (Real-Time Spectrum Analyzer) Mode—Option 350 (CPU2 Only)
Record/Playback (RTSA Option)
— Rename Using the FieldFox labeler, change the name of the session.
AutoSession (n) is the default name where (n) is the next-available
number. Learn more in “How to use the FieldFox labeler ” on
page 674.
— Sort
Arrange the listing of sessions by Name, by Date, or by Size.
Sort can also be used during a Recall Session, before choosing a
session to open.
— Delete
After a confirmation prompt, removes the contents of the
selected session from the list.
— Copy
Copies the selected session to a different storage device, or the
same storage device with ‘Copy(n)_’ appended to the beginning of
the name so that duplication is prevented.
— Copy All
Copies ALL of the listed sessions to a different storage
device, or the same storage device with ‘Copy(n)_’ appended to the
beginning of the names so that duplication is prevented.
— Delete All
Deletes ALL of the listed sessions.
Record Playback Example (RTSA Mode Only)
The following “Interval Recording” example shows how you can record spectral
activity over a longer period of time with less trace storage.
—Press Trace 6
—Then Record Playback
—Then New Session
—Then Recording Configuration
—Then Record Source to Trace1
—Then Back
—Then Recorder Player
—Then Record let the recorder run for several seconds.
—Then Stop
to end the recording.
This session can be played back: For example:
—Press Trace 6
—Then Record Playback
—Then Play
To Next Page
Loading...
Need help?
General
