Keysight Technologies N5166B CXG Programming Guide

Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide 195
Programming the Status Register System
Status Groups
Data Questionable Frequency Event Enable Register
Lets you choose which bits in the Data Questionable Frequency Event Register
set the summary bit (bit 5 of the Data Questionable Condition Register) to 1.
Command: STATus:QUEStionable:FREQuency:ENABle <value>, where <value> is the sum of the
decimal values of the bits you want to enable.
Example: Enable bit 5 and bit 2 so that whenever either of those bits are set to 1, the Data Questionable
Frequency summary bit of the Data Questionable Condition Register is set to 1. Send the command
STAT:QUES:FREQ:ENAB 36 (32 + 4).
Query: STATus:QUEStionable:FREQuency:ENABle?
Response: Decimal value of the sum of the bits previously enabled with the
STATus:QUEStionable:FREQuency:ENABle <value> command.

Keysight Technologies N5166B CXG Specifications

General

Brand	Keysight Technologies
Model	N5166B CXG
Category	Portable Generator
Language	English