30 Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide
Getting Started with Remote Operation
Preferences
Preferences
The following commonly-used manual command sections are included here:
“Configuring the Display for Remote Command Setups” on page 30
“Getting Key Help” on page 30
Configuring the Display for Remote Command Setups
Getting Key Help
For details on each key and for equivalent SCPI commands (if applicable), use the key help (described below and in the User’s Guide).
Select Update in Remote until On is
highlighted.
SCPI commands:
:DISPlay:REMote ON|OFF|1|0
:DISPlay:REMote?
For details on each key and for equivalent SCPI commands (if applicable), use the key help (described in User’s Guide).
When you press the front-panel Help button:
Help displays for the next key you press.
The “key help” includes a description of the key’s functionality and a list of equivalent SCPI
commands (if they exist). This feature is especially useful if you are building a SCPI program
based on front-panel key presses.
Use the cursor keys, Page Up, Page Down, and the RPG knob to scroll the help text. Then
press Cancel to close the help window or press any other key to close the help window and
execute that key.
To Next Page
Loading...
Need help?
General
