Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide 343
Creating and Downloading User–Data Files
User File Data (Bit/Binary) Downloads
There are three ways to FTP a file:
— use the Microsoft Internet Explorer FTP feature
— use the signal generator’s internal web server
— use the PC or UNIX command window
Using Microsoft’s Internet Explorer
1. Enter the signal generator’s hostname or IP address as part of the FTP
URL.
ftp://<host name> or <IP address>
2. Press Enter on the keyboard or Go from the Internet Explorer window.
The signal generator files appear in the Internet Explorer window.
3. Drag and drop files between the PC and the Internet Explorer window
Using the Signal Generator’s Internal Web Server
1. Enter the signal generator’s hostname or IP address in the URL.
http://<host name> or <IP address>
2. Click the Signal Generator FTP Access button located on the left side of
the window.
The signal generator files appear in the web browser’s window.
3. Drag and drop files between the PC and the browser’s window
For more information on the web server feature, refer to the Programming
Guide.
Using the Command Window (PC or UNIX)
1. From the PC command prompt or UNIX command line, change to the
proper directory:
— When downloading from the signal generator, the directory in
which to place the file.
— When downloading to the signal generator, the directory that
contains the file.
2. From the PC command prompt or UNIX command line, type ftp
<instrument name>.
Where instrument name is the signal generator’s hostname or IP
address.
3. At the User: prompt, press Enter (no entry is required).
4. At the Password: prompt, press Enter (no entry is required).
To Next Page
Loading...
Need help?
General
