To Next Page

To Previous Page

Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide 363

Creating and Downloading User–Data Files

FIR Filter Coefficient Downloads

Modulating and Activating the Carrier

The following commands set the carrier frequency and power, and turns on the

modulation and the RF output.

1. Set the carrier frequency to 2.5 GHz:

:FREQuency:FIXed 2.5GHZ

2. Set the carrier power to –10.0 dBm:

:POWer:LEVel -10.0DBM

3. Activate the modulation:

:OUTPut:MODulation:STATe ON

4. Activate the RF output:

:OUTPut:STATe ON

Keysight Technologies N5166B CXG Programming Guide

Other manuals for Keysight Technologies N5166B CXG