24 Installation Note N9032-90007
Solid State Disk Drive
Software Updates
The currently installed instrument software version can be easily determined by pressing the
following front panel keys:
System, Show System
The software revision can be found on this screen as the:
Instrument S/W Revision
Updating the Instrument Software:
If an instrument software update is required, the latest revision of the X-Series software may be
downloaded from:
http://www.keysight.com/find/xseries_software
FPGA Code Compatibility
One of the main reasons that the instrument application software must be the same version on all
disk drives used in a particular instrument, in addition to factory calibration data compatibility
issues, is that there is FPGA program code on multiple assemblies inside the instrument that must
be compatible with the version of instrument software being used. The only way to ensure
compatibility for all disk drives is to use the same instrument application software on all drives.
To Next Page
Loading...
Need help?
General
