30
Chapter 1 Quick Start
To Rack Mount the Function Generator
1
To rack mount a single instrument, order adapter kit 5063-9240.
To rack mount two instruments side-by-side, order lock-link kit 5061- 8769
and flange kit 5063-9212. Be sure to use the support rails in the rack cabinet.
In order to prevent overheating, do not block the flow of air into or out of
the instrument. Be sure to allow enough clearance at the rear, sides, and
bottom of the instrument to permit adequate internal air flow.
33210A users guide.book Page 30 Wednesday, July 16, 2008 11:16 AM
To Next Page
Loading...
