Keysight 33210A - Common Instrument Specifications; Modulation, Sweep, and Burst Functions

13
Chapter 1 Specifications
Keysight 33210A Function / Arbitrary Waveform Generator
4
1
Common Characteristics
Frequency
Accuracy
[6]
:
90 days: ± (10 ppm + 3 pHz)
1 year: ± (20 ppm + 3 pHz)
Resolution: 1µHz
Amplitude
Range:
Into 50 Ω: 10 mVpp to 10 Vpp
Into open circuit: 20 mVpp to 20 Vpp
Accuracy (at 1 kHz):
[2], [3]
± 2% of setting ± 1
mVpp
Units: Vpp, Vrms, dBm
Resolution: 3 digits
DC Offset
Range (peak AC + DC): ± 5 V into 50 Ω
±10 V into open circuit
Accuracy:
[2], [3]
± 2% of offset setting
± 0.5% of ampl. ± 2 mV
Resolution: 3 digits
Main Output
Impedance: 50 Ω typical
Isolation: 42 Vpk maximum to
earth
Protection: Short-circuit protected,
overload automatically
disables main output
External Frequency Reference (Option 001)
Rear Panel Input:
Lock Range: 10 MHz ± 500 Hz
Level: 100 mVpp to 5 Vpp
Impedance: 1 kΩ typical
Lock Time: < 2 seconds
Rear Panel Output:
Frequency: 10 MHz
Level: 632 mVpp (0 dBm),
typical
Impedance: 50 Ω typ, AC coupled
Phase Offset:
Range: +360 to -360 degrees
Resolution: 0.001 degrees
Accuracy: 20 ns
Modulation
AM
Carrier Waveforms: Sine, Square
Source: Internal/External
Internal Modulation: Sine, Square, Ramp,
Triangle, Noise, Arb
(2 mHz to 20 kHz)
Depth: 0.0% to 120.0%
FM
Carrier Waveforms: Sine, Square
Source: Internal/External
Internal Modulation: Sine, Square, Ramp,
Triangle, Noise, Arb
(2 mHz to 20 kHz)
Deviation: DC to 5 MHz
PWM
Carrier Waveforms: Pulse
Source: Internal/External
Internal Modulation: Sine, Square, Ramp,
Triangle, Noise, Arb
(2 mHz to 20 kHz)
Deviation: 0% to 100% of pulse
width
External Modulation Input
(for AM, FM, PWM)
Voltage Range: ± 5 V full scale
Input Resistance: 5 kΩ typical
Bandwidth: DC to 20 kHz