Keysight 33210A - Trigger and Interface Specifications

14
Chapter 1 Specifications
Keysight 33210A Function / Arbitrary Waveform Generator
1
Sweep
Waveforms: Sine, Square, Ramp
Type: Linear or Logarithmic
Direction: Up or Down
Sweep Time: 1 ms to 500 s
Trigger Source: Single, External, or
Internal
Marker Falling edge of Sync
signal (programmable
frequency)
Burst
[7]
Wav
eforms: Sine, Square, Ramp
Type: Counted (1 to 50,000
cycles), Infinite, Gated
Start/Stop Phase: +360 to -360 degrees
Internal Period: 1 µs to 500 s
Gate Source: External Trigger
Trigger Source: Single, External, or
Internal
Trigger Characteristics
Trigger Input:
Input Level: TTL compatible
Slope: Rising or falling,
selectable
Pulse Width: > 100 ns
Input Impedance: > 10 kΩ, DC coupled
Latency: < 500 ns
Jitter (RMS) 6 ns (3.5 ns for Pulse)
Trigger Output:
Level: TTL compatible into
>
1 kΩ
Pulse Width: > 400 ns
Output Impedance: 50 Ω, typical
Maximum Rate: 1 MHz
Fanout:
< 4 Keysight 33210As
(or equivalent)
Programming Times (typical)
Configuration Times
Arb Download Times (binary transfer)
Download times do not include setup or output time.
USB 2.0 LAN (VXI-11) GPIB
Function
Change
120 ms 120 ms 120 ms
Frequency
Change
2 ms 3 ms 2 ms
Amplitude
Change
30 ms 30 ms 30 ms
Select User
Arb
130 ms 130 ms 130 ms
USB 2.0 LAN (VXI-11) GPIB
2 K points 5 ms 9 ms 10 ms
4 K points 8 ms 15 ms 20 ms
8K points 14 ms 27 ms 40 ms