2 Base Matrix Configuration
190 Keysight 34934A User’s Guide
Note that each row signal (R1 through R16 is routed out on two pins on the
extension headers. You can make row signal connections to either row (upper,
lower) of the connector.
If you are going create an expanded-row matrix using multiple modules and
terminal blocks, plan your wiring placement for each terminal block carefully, to
allow for a daisy-chain interconnection between terminal blocks—in addition to
any row wiring you may connect to the expansion headers. This interconnection is
illustrated in “Arranging Multiple 34934A Modules with Terminal Blocks” on
page 215.
R12 17 R12 18 R16 17 R16 18
IL1 19 IL2 20 IL3 19 IL4 20
Header J24 Header J25
Description Pin Description Pin Description Pin Description Pin
To Next Page
Loading...