2 Base Matrix Configuration
160 Keysight 34934A User’s Guide
Note that each row signal (R1 through R8 (H,L) is routed out on four pins on the
extension headers. You can make row signal connections to either row (upper,
lower) of the connector.
If you are going create an expanded-row matrix using multiple modules and
terminal blocks, plan your wiring placement for each terminal block carefully, to
allow for a daisy-chain interconnection between terminal blocks—in addition to
any row wiring you may connect to the expansion headers. This interconnection is
illustrated in “Arranging Multiple 34934A Modules with Terminal Blocks” on
page 215.
Configuring an 8x64 Matrix using a Configuration Block
34934C-002 Configuration Block: Layout
This configuration block is labeled with the model number and the abbreviated
module name.
R4 15 R4 16 R8 15 R8 16
No connect 17 No connect 18 No connect 17 No connect 18
IL1 19 IL2 20 IL3 19 IL4 20
Headers J24 Headers J25
Description Pin Description Pin Description Pin Description Pin
To Next Page
Loading...