Keysight 34934A - Creating Expanded Matrices with Terminal Blocks

To Next Page

To Previous Page

Expanded-Row Matrix Configuration 3

Keysight 34934A User’s Guide 221

Creating Expanded-Row Matrices Using Terminal Blocks

Four-row matrices use the 34934T-001 terminal block. Eight-row or sixteen-row

matrices use the 34934T-002 terminal block.

Your large matrix will be built as multiples of a base configuration of 4x32, 4x64,

4x128, 8x32, 8x64 or 16x32. Thus, please thoroughly read the appropriate base

configuration section in Chapter 2, “Base Matrix Configuration”, before combining

modules and these terminal blocks to create multiples of your base matrix.

The illustration below shows expansion header locations on the 34934T-001

terminal block; the expansion header layout for the 34934T-002 is the same.

+/- 100V

J24 J25

JUMPERS

CONFIG

JUMPERS

FOR 4X128

AND 4X32

USE OVERLAY

34934T OPT001

1W / 2W / MIXED

1W OPERATION

DUAL (H,L) 4X64

JUMPERS

1 0

2W OPERATION

4X64

C 1

C 2

C 3 C 4 R 1 R 2

H L

H L H L H L H L

C 5

C 7

C 8 C 9 R 3 R 4

C 9 C 10 C 11 C 12 C 13 C 14

H L

H L H L H L H L

C 15 C 16 C 17 C 18 C 19 C 20

C 21 C 22 C 23 C 24 C 25 C 26

H L

H L H L H L H L

C 27 C 28 C 29 C 30 C 31 C 32

R 1 R 2 C 33 C 34 C 35 C 36

H L

H L H L H L H L

R 3

R 4

C 37 C 38 C 39 C 40

C 41 C 42 C 43 C 44 C 45 C 46

H L

H L H L H L H L

C 47 C 48 C 49 C 50 C 51 C 52

C 53 C 54 C 55 C 564 C 57 C 58

H L

H L H L H L H L

C 59 C 60 C 61 C 62 C 63 C 64

4x32, 8x32, 8x64 and 16x32

expand using both J24 and J25

4x64 and 4x128 expand using only J24

Main Page

Keysight 34934A - Creating Expanded Matrices with Terminal Blocks

Table of Contents