2 Base Matrix Configuration
200 Keysight 34934A User’s Guide
34934C-002: Extension Header Pin Assignments for 16x32
Note that each row signal (R1 through R16 is routed out on two pins on the
extension headers. You can make row signal connections to either row (upper,
lower) of the connector.
If you are going to create an expanded-row matrix using multiple modules and
configuration blocks, plan your wiring placement for each configuration block
carefully, to allow for a daisy-chain interconnection between configuration
blocks—in addition to any row wiring you may connect to the expansion headers.
This interconnection is illustrated in “Arranging Multiple 34934A Modules with
Configuration Blocks” on page 218.
Headers J4, J5 Headers J3, J6
Description Pin Description Pin Description Pin Description Pin
No connect 1 No connect 2 No connect 1 No connect 2
R13R14R53R54
R9 5 R9 6 R13 5 R13 6
R27R28R67R68
R10 9 R10 10 R14 9 R14 10
R3 11 R3 12 R7 11 R7 12
R11 13 R11 14 R15 13 R15 14
R4 15 R4 16 R8 15 R8 16
R12 17 R12 18 R16 17 R16 18
IL1 19 IL2 20 IL3 19 IL4 20
To Next Page
Loading...