34 Network Analyzer
1 Installation
Windows XP Pro for Embedded Systems (HDD Rev KY22x and
above)
Step 1. Turn on the E5061B. Do not touch any key on the
front panel during boot up.
Step 2. The screen as shown in the Figure 6 appears. Select
Windows XP Professional and press [Enter].
Step 3. The screen as shown in the Figure 7 appears. Press
[Enter].
Figure 6 System start up screen in Windows XP Pro for Embedded
Systems (1/2)
After several seconds, the next screen appears automatically even if you
do not press any key.
To Next Page
Loading...
Need help?
General
