4 Keysight M8000 Series of BER Test Solutions Installation Guide
Safety Symbols
Table 1 Safety Symbol
Symbol Description
Indicates warning or caution. If you see this symbol on a
product, you must refer to the manuals for specific
Warning or Caution information to avoid personal injury
or damage to the product.
Frame or chassis ground terminal. Typically connects to
the equipment’s metal frame.
KC is the Korean certification mark to demonstrate that
the equipment is Class A suitable for professional use
and is for use in electromagnetic environments outside
of the home.
Contains parts or assemblies susceptible to damage by
electrostatic discharge (ESD). Use electrostatic
discharge protective handling procedures to avoid
malfunctions or potential damage to the instruments.
Indicates the time period during which no hazardous or
toxic substance elements are expected to leak or
deteriorate during normal use. Forty years is the
expected useful life of the product.
The RCM Mark is a compliance mark to the ACMA
(Australian Spectrum Management Agency). This
indicates compliance with all Australian EMC regulatory
information.
Indicates that the product was tested and has met the
certification requirements for electrical, plumbing
and/or mechanical products.
To Next Page
Loading...
