Keysight M8000 Series - Completing the Installation and Setup Process

68 Keysight M8000 Series of BER Test Solutions Installation Guide
2 Installing Modules
Completing the Installation and Setup Process
Refer to the Keysight M8050A Getting Started Guide for procedures
required to complete the installation and setup process.
The Keysight M8050A Getting Started Guide contains procedures for the
following:
• Set up an external host computer
• Power up and power down the system
• Verify basic operation
• Install Keysight IO Libraries Suite
• Install M8070B software
• Install the measurement plugins
• Install module licenses (for on-site upgrades only)
The Keysight M8050A Getting Started Guide also contains the following
information:
• Starting the M8070B software interface
• Making a basic measurement
Detailed information, consisting of User Guide, Programming Guide and
other supported documents for the Keysight M8020A, M8040A and
M8050A are available at:
www.keysight.com/find/M8020A
www.keysight.com/find/M8040A
www.keysight.com/find/M8050A