Keysight M8000 Series Installation Guide

Keysight M8000 Series of BER Test Solutions Installation Guide 7
About This Guide
This guide provides detailed information for installing Keysight M8000 modules, including
the Keysight M9537A AXIe Embedded Controller, AXIe System Module (ASM) in the
Keysight M9505A/M9506A/M9514A AXIe chassis. The procedures in this guide are not
required for “bundled” systems such as the M8020A-BU1, M8020A-BU2, M8040A-BU1,
M8040A-BU2, M8040A-BU3, M8050A-BU2, M8050A-BU3, M8050A-BU4 or
M8050A-BU5. For these systems, refer to the Keysight M8000 Series BER Test Solutions
Getting Started Guide, Keysight M8040A Getting Started Guide and Keysight M8050A
Getting Started Guide.
After performing the procedures in this document, you are directed to procedures in the
Keysight M8000 Series BER Test Solutions Getting Started Guide, Keysight M8040A
Getting Started Guide and Keysight M8050A Getting Started Guide to complete the
installation.

Keysight M8000 Series Specifications

General

Brand	Keysight
Model	M8000 Series
Category	Test Equipment
Language	English