Getting Started 1
Keysight N1911A and N1912A Installation Guide 7
Power Meter and Sensor Capability
Your P-Series power meter is compatible with Keysight P-series, E-Series E9320,
E-Series E9300, E-Series E4410, N8480 Series and the 8480 Series power
sensors. However, not all sensor and meter combinations have the same features
or capabilities. The main differences are:
Specifications
For the characteristics and specifications of the N1911A and N1912A P-Series
Power Meters, refer to the datasheet at
http://literature.cdn.keysight.com/litweb/pdf/5989-2471EN.pdf
Features
P-Series
N1920
E-Series
E9320
E-Series
E9300
E-Series
E4410
8480
Series
N8480
Series
Average Power of CW Signal * * * * * *
Average Power of modulated signal * * * * *
Peak Power * *
Cal Factors stored on EEPROM * * * *
*
[a]
≥200 Readings/sec. * * * *
Rising Edge Trigger * *
Falling Edge Trigger * *
[a] Not applicable for N8480 Series power sensors with Option CFT.
To Next Page
Loading...
