Keysight N1911A

Getting Started 1
Keysight N1911A and N1912A Installation Guide 13
These keys are located along the lower edge of the display.
Key Function
Press this key to access general configuration-menus, such as GPIB address. You
can also access some measurement configuration-menus. The measurement
screen remains visible.
Press this key to access the channel configuration menus. Channel parameters such
as averaging and offsets are configured from this menu.
Press this key to access the triggering menu. Unless a P-Series or an E-Series
E9320A sensor is connected, all the menu keys are disabled (greyed out).
Press this key to setup relative measurements or set display offsets.
Use this key to configure the selected measurement.
Press this key to access the measurement display menu. You can choose the
displayed measurement resolution, units and display format.
Use this key together with to configure measurement displays.