Keysight N6700C Series - Page 193

Parameter Typical Return
Step 0 - 99, *RST 0 (none)
Programs a time constant for the current Arb: ARB:CURR:EXP:TCON 5,(@1)
Programs a time constant for the voltage Arb: ARB:VOLT:EXP:TCON 5,(@1)
Programs a time constant for the power Arb: ARB:POW:EXP:TCON 5,(@1)
Programs a time constant for the resistance Arb: ARB:RESISTANCE:EXP:TCON 5,(@1)
Programs a time constant for step 0: ARB:SEQ:STEP:CURR:EXP:TCON 5, 0,(@1)
[SOURce:]ARB:CURRent:EXPonential:TIMe <value>, (@<chanlist>)
[SOURce:]ARB:CURRent:EXPonential:TIMe? [MIN|MAX,] (@<chanlist>)
[SOURce:]ARB:VOLTage:EXPonential:TIMe <value>, (@<chanlist>)
[SOURce:]ARB:VOLTage:EXPonential:TIMe? [MIN|MAX,] (@<chanlist>)
[SOURce:]ARB:POWer:EXPonential:TIMe <value>, (@<chanlist>)
[SOURce:]ARB:POWer:EXPonential:TIMe? [MIN|MAX,] (@<chanlist>)
[SOURce:]ARB:RESISTANCE:EXPonential:TIMe <value>, (@<chanlist>)
[SOURce:]ARB:RESISTANCE:EXPonential:TIMe? [MIN|MAX,] (@<chanlist>)
Specifies the total time for the current, voltage, power, or resistance to go from the starting level to
the ending level in seconds.
[SOURce:]ARB:SEQuence:STEP:CURRent:EXPonential:TIMe <value>, <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:CURRent:EXPonential:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:VOLTage:EXPonential:TIMe<value>, <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:VOLTage:EXPonential:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:POWer:EXPonential:TIMe<value>, <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:POWer:EXPonential:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:RESISTANCE:EXPonential:TIMe<value>, <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:RESISTANCE:EXPonential:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)
Specifies the total time for the current, voltage, power, or resistance to go from the starting level to
the ending level in seconds for Arb sequence steps.
Parameter Typical Return
0 – 262.144 | MIN | MAX, *RST 0 <total time>
Step 0 - 99, *RST 0 (none)
Programs the total time for the current Arb: ARB:CURR:EXP:TIM 10,(@1)
Programs the total time for the voltage Arb: ARB:VOLT:EXP:TIM 10,(@1)
Programs the total time for the power Arb: ARB:POW:EXP:TIM 10,(@1)
Programs the total time for the resistance Arb: ARB:RESISTANCE:EXP:TIM 10,(@1)
Programs the total time for step 0: ARB:SEQ:STEP:CURR:EXP:TIM 10, 0,(@1)
Keysight N6700C Operating and Service Guide 193
5 SCPI Programming Reference