Keysight N6700C Series

To Next Page

To Previous Page

[SOURce:]ARB:CURRent:STAircase:END:TIMe <value>, (@<chanlist>)

[SOURce:]ARB:CURRent:STAircase:END:TIMe? [MIN|MAX,] (@<chanlist>)

[SOURce:]ARB:VOLTage:STAircase:END:TIMe<value>, (@<chanlist>)

[SOURce:]ARB:VOLTage:STAircase:END:TIMe? [MIN|MAX,] (@<chanlist>)

[SOURce:]ARB:POWer:STAircase:END:TIMe<value>, (@<chanlist>)

[SOURce:]ARB:POWer:STAircase:END:TIMe? [MIN|MAX,] (@<chanlist>)

[SOURce:]ARB:RESISTANCE:STAircase:END:TIMe<value>, (@<chanlist>)

[SOURce:]ARB:RESISTANCE:STAircase:END:TIMe? [MIN|MAX,] (@<chanlist>)

Specifies the time in seconds, after the staircase completes, that the ending current, voltage, power,

or resistance level persists.

[SOURce:]ARB:SEQuence:STEP:CURRent:STAircase:END:TIMe <value>, <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:CURRent:STAircase:END:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:VOLTage:STAircase:END:TIMe <value>, <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:VOLTage:STAircase:END:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:POWer:STAircase:END:TIMe <value>, <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:POWer:STAircase:END:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:RESISTANCE:STAircase:END:TIMe <value>, <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:RESISTANCE:STAircase:END:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)

Specifies the time in seconds, after the staircase completes, that the ending current, voltage, power,

or resistance level persists for Arb sequence steps.

Parameter Typical Return

0 – 262.144 | MIN | MAX, *RST 0 <end time>

Step 0 - 99, *RST 0 (none)

Programs an end time after the current staircase:ARB:CURR:STA:END:TIM 2,(@1)

Programs an end time after the voltage staircase:ARB:VOLT:STA:END:TIM 2,(@1)

Programs an end time after the power staircase:ARB:POW:STA:END:TIM 2,(@1)

Programs an end time after the resistance staircase: ARB:RESISTANCE:STA:END:TIM 2,(@1)

Programs an end time for step 0:ARB:SEQ:STEP:CURR:STA:END:TIM 2, 0,(@1)

[SOURce:]ARB:CURRent:STAircase:NSTeps <value>, (@<chanlist>)

[SOURce:]ARB:CURRent:STAircase:NSTeps? [MIN|MAX,] (@<chanlist>)

[SOURce:]ARB:VOLTage:STAircase:NSTeps<value>, (@<chanlist>)

[SOURce:]ARB:VOLTage:STAircase:NSTeps? [MIN|MAX,] (@<chanlist>)

[SOURce:]ARB:POWer:STAircase:NSTeps<value>, (@<chanlist>)

[SOURce:]ARB:POWer:STAircase:NSTeps? [MIN|MAX,] (@<chanlist>)

[SOURce:]ARB:RESISTANCE:STAircase:NSTeps<value>, (@<chanlist>)

[SOURce:]ARB:RESISTANCE:STAircase:NSTeps? [MIN|MAX,] (@<chanlist>)

Specifies the number of steps in the staircase.

Keysight N6700C Operating and Service Guide 207

5 SCPI Programming Reference

Keysight N6700C Series - Page 207