[SOURce:]ARB:CURRent:TRAPezoid:TOP[:LEVel] <value>, (@<chanlist>)
[SOURce:]ARB:CURRent:TRAPezoid:TOP[:LEVel]? [MIN|MAX,] (@<chanlist>)
[SOURce:]ARB:VOLTage:TRAPezoid:TOP[:LEVel] <value>, (@<chanlist>)
[SOURce:]ARB:VOLTage:TRAPezoid:TOP[:LEVel]? [MIN|MAX,] (@<chanlist>)
[SOURce:]ARB:POWer:TRAPezoid:TOP[:LEVel] <value>, (@<chanlist>)
[SOURce:]ARB:POWer:TRAPezoid:TOP[:LEVel]? [MIN|MAX,] (@<chanlist>)
[SOURce:]ARB:RESISTANCE:TRAPezoid:TOP[:LEVel] <value>, (@<chanlist>)
[SOURce:]ARB:RESISTANCE:TRAPezoid:TOP[:LEVel]? [MIN|MAX,] (@<chanlist>)
Specifies the top current, voltage, power, or resistance level of the trapezoid.
[SOURce:]ARB:SEQuence:STEP:CURRent:TRAPezoid:TOP[:LEVel] <value>, <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:CURRent:TRAPezoid:TOP[:LEVel]? [MIN|MAX,] <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:VOLTage:TRAPezoid:TOP[:LEVel] <value>, <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:VOLTage:TRAPezoid:TOP[:LEVel]? [MIN|MAX,] <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:POWer:TRAPezoid:TOP[:LEVel] <value>, <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:POWer:TRAPezoid:TOP[:LEVel]? [MIN|MAX,] <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:RESISTANCE:TRAPezoid:TOP[:LEVel] <value>, <step#>, (@<chanlist>)
[SOURce:]ARB:SEQuence:STEP:RESISTANCE:TRAPezoid:TOP[:LEVel]? [MIN|MAX,] <step#>, (@<chanlist>)
Specifies the top current, voltage, power, or resistance level of the trapezoid for Arb sequence steps.
Parameter Typical Return
Current: 0 - maximum|MIN|MAX, *RST MIN
Voltage: 0 - maximum|MIN|MAX, *RST MIN
Power: 0 - maximum|MIN|MAX, *RST MIN
Resistance: 0 - maximum|MIN|MAX, *RST MIN
Values are range and module-rating dependent.
<top value>
Step 0 - 99, *RST 0 (none)
Programs the top level current: ARB:CURR:TRAP:TOP2,(@1)
Programs the top level voltage: ARB:VOLT:TRAP:TOP 20,(@1)
Programs the top level power: ARB:POW:TRAP:TOP 50,(@1)
Programs the top level resistance: ARB:RESISTANCE:TRAP:TOP 100,(@1)
Programs a top level for step 0: ARB:SEQ:STEP:CURR:TRAP:TOP 2, 0,(@1)
[SOURce:]ARB:CURRent:TRAPezoid:TOP:TIMe <value>, (@<chanlist>)
[SOURce:]ARB:CURRent:TRAPezoid:TOP:TIMe? [MIN|MAX,] (@<chanlist>)
[SOURce:]ARB:VOLTage:TRAPezoid:TOP:TIMe<value>, (@<chanlist>)
[SOURce:]ARB:VOLTage:TRAPezoid:TOP:TIMe? [MIN|MAX,] (@<chanlist>)
[SOURce:]ARB:POWer:TRAPezoid:TOP:TIMe<value>, (@<chanlist>)
[SOURce:]ARB:POWer:TRAPezoid:TOP:TIMe? [MIN|MAX,] (@<chanlist>)
[SOURce:]ARB:RESISTANCE:TRAPezoid:TOP:TIMe<value>, (@<chanlist>)
[SOURce:]ARB:RESISTANCE:TRAPezoid:TOP:TIMe? [MIN|MAX,] (@<chanlist>)
Specifies the time of the top level of the trapezoid in seconds.
5 SCPI Programming Reference
218 Keysight N6700C Operating and Service Guide
To Next Page
Loading...
