Keysight N777 C Series - Status:questionable:enable; Status0:Questionable[:Event]; Status0:Questionable:condition

Keysight N777xC Series Tunable Laser Family Programming Guide 39
Instrument Setup and Status 3
Parameters: The bit value for the questionable enable mask as a 16-bit unsigned integer value (0 .. +65535)
The default value is 65535.
Response: none
Example: :stat:ques:enab 128
Command: :STATus:QUEStionable:ENABle?
Syntax: :STATus:QUEStionable:ENABle?
Description: Returns the QSESM for the event register
Parameters: none
Response: The bit value for the QSEM as a 16-bit unsigned integer value (0 .. +65535)
Example: :stat:ques:enab? -> +128
Command: :STATus0:QUEStionable[:EVENt]?
Syntax: :STATus0:QUEStionable[:EVENt]?
Description: Returns the questionable status of slot n - the Questionable Slot Status Event Register (QSSER).
Parameters: none
Response: The results for the individual slot events (a 16-bit unsigned integer value, where 0 ≤ value ≤ 65535):
Bit
16 - 2
1
0
Mnemonic
Not Used
Slot n: A Zeroing operation has failed
Slot n: Excessive Value has occurred
Decimal Value
2
1
Every nth bit is the summary of the laser module.
Example: :stat0:oper?
-> +0
Command: :STATus0:QUEStionable:CONDition?
Syntax: :STATus0:QUEStionable:CONDition?
Description: Returns the Questionable Slot Status Condition Register for the laser module.
Parameters: none