Keysight N777 C Series - System:communicate:ethernet:ipaddress; System:communicate:ethernet:ipaddress:current; System:communicate:ethernet:macaddress

Keysight N777xC Series Tunable Laser Family Programming Guide 51
Instrument Setup and Status 3
Parameters: String (Up to four groups of up to 3 digits, groups separated by ".". Groups with leading
zeroes are interpreted as octal numbers.)
Response: None
Example: :syst:comm:eth:ipad “192.132.13.2”
Command: :SYSTem:COMMunicate:ETHernet:IPADdress?
Syntax: :SYSTem:COMMunicate:ETHernet:IPADdress?
Description: Get the manually set IP address of the system.
Parameters: None
Response: String
Example: :syst:comm:eth:ipad? -> “192.132.13.2”
Command: :SYSTem:COMMunicate:ETHernet:IPADdress:CURRent?
Syntax: :SYSTem:COMMunicate:ETHernet:IPADdress:CURRent?
Description: Get the current IP address of the instrument.
Parameters: None
Response: String
Example: :syst:comm:eth:ipad:curr? -> “192.132.13.2”
Command: :SYSTem:COMMunicate:ETHernet:MACaddress?
Syntax: :SYSTem:COMMunicate:ETHernet:MACaddress?
Description: Get the MAC address of the network adapter.
Parameters: None
Response: String (hexadecimal value).
Example: :syst:comm:eth:mac? -> "00-07-E0-14-AE- 08"