Keysight N777 C Series - Status:questionable:condition; Status:questionable:enable

38 Keysight N777xC Series Tunable Laser Family Programming Guide
3 Instrument Setup and Status
Command: :STATus:QUEStionable[:EVENt]?
Syntax: :STATus:QUEStionable[:EVENt]?
Description: Returns the Questionable Status Event Summary Register (QSESR).
Parameters: none
Response: The sum of the results for the QSESR as a 16-bit unsigned integer value (0 .. +65535)
Bits Mnemonics Decimal Value
15 - 1 Not used 0
0 Slot 0 summary 1
Example: :stat:ques? -> +0
Command: :STATus:QUEStionable:CONDition?
Syntax: :STATus:QUEStionable:CONDition?
Description: Returns the Questionable Status Condition Summary Register.
Parameters: none
Response: The sum of the results for the Questionable Status Condition Summary Register as a 16-bit unsigned integer value
(0 .. +65535)
Bits Mnemonics Decimal Value
15 - 1 Not used
0 Slot 0 summary 1
Example: :stat:ques:cond?
-> +0
Command: :STATus:QUEStionable:ENABle
Syntax: :STATus:QUEStionable:ENABle<wsp><value>
Description: Sets the bits in the Questionable Status Enable Summary Mask (QSESM) that enable the contents of the QSESR to affect the
Status Byte (STB).
Setting a bit in this register to 1 enables the corresponding bit in the QSESR to affect bit 3 of the Status Byte.