Keysight N777 C Series - Interface;Instrument Behaviour Settings - the System Subsystem; System:date; System:help:headers

Keysight N777xC Series Tunable Laser Family Programming Guide 41
Instrument Setup and Status 3
Interface/Instrument Behaviour Settings – The SYSTem Subsystem
The SYSTem subsystem lets you control the instrument’s serial interface.
You can also control some internal data (like date, time, and so on)
Command: :SYSTem:DATE
Syntax: :SYSTem:DATE<wsp><year>,<month>,<day>
Description: Sets the instrument’s internal date.
Parameters: the first value is the year (four digits),
the second value is the month, and
the third value is the day.
Response: none
Example: :syst:date 2019, 10, 12
Command: :SYSTem:DATE?
Syntax: :SYSTem:DATE?
Description: Returns the instrument’s internal date.
Parameters: none
Response: The date in the format year, month, day (16-bit signed integer values)
Example: :syst:date? -> +2019,+10,+12
Command: :SYSTem:HELP:HEADers?
Syntax: :SYSTem:HELP:HEADers?
Description: Returns a list of commands.
Parameters: none
Response: Returns a list of commands
Example: :syst:help:head? -> Returns a list of all commands